SATO Plug-In Interface Cards

All SATO Industrial Printers use Plug-In Interface Cards fro maximum flexibility. They can be easily changed in the field in a matter of seconds to accommodate any of the commonly used host interfaces.

 

 

SATO Plug-In Interface Cards

IEEE1284 - High-Speed Parallel

Connector: Standard Centronics 36 Pin (Female) Transmission Speed: Up to 450k bytes per second Port Type Compatibility: ECP/Bi-Directional compatible Printer Cable Type: IEEE1284 Compliant Parallel (cable not included) Max. Printer Cable Length: 10 feet (3 meters)

USB - Universal Serial Bus

Connector: Standard Type B Port Compatibility: USB 1.0 on a PC running Windows 98 or 2000 only Transmission Speed: Up to 12 MBits per second Printer Cable Type: USB A/B (6 feet cable supplied with interface) Max. Cable Length: 6 feet to printer or Hub; up to 127 devices may be daisy chained using USB Hubs USB Software: Software/drivers supplied on a CD - Plug & Play Compatible

Serial Interfaces

RS232 - High-Speed Connector: Standard DB-25S (Female) Settings via dip switch on the board: Baud Rates: 9600, 19200, 38400, 57600 Communication Protocols: Ready/Busy, Xon/Xoff, SATO Status, 2, 3, and 4 Printer Cable Type: NULL MODEM cable when connected to standard PC RS232C port. (Cable not included) Max. Printer Cable Length: 50 feet at up to 19,200 baud rate. Determined by cable quality and baud rate. Refer to the ANSI/EIA RS232C spec for more info.

RS422/485 Connector: 2 Standard DB-9 (Female); Supports Multi-Drop of up to 32 printers Settings via dip switch on the board: Baud Rates: 2400, 4800, 9600, 19200 Parity: ODD, EVEN, NONE Stop Bits: 1 or 2 / Date Bits: 7 to 8 Communication Protocols: Ready/Busy, Xon/Xoff, SATO Status 3 Printer Cable Type: RS422/485 Standard Cable (cable not included) Max. Printer Cable Length: 3,900 feet

Ethernet Connections General Ethernet Specifications: Protocols Supported TCP/IP, IPX/SPX, Direct Mode IPX/IP, DLC/LLC, NetBEUI, NetBIOS/IP Support Materials:  - Printed Quick Start Guide  - CD incl. Administrators Manual (PDF), XAdmin Utility Software, Port Monitor Software Compatibility: HP's JetAdmin and Web JetAdmin printer management software Note: All protocols are simultaneously active Management:  - WP-Admin utility for easy configuration from Windows  - HP JetAdmin NetWare and TCP/IP Windows-based utility  - XAdmin TCP/IP Windows-based utility  - Web XAdmin web-browsed facility (incl. multilingual capability)  - HP Web JetAdmin Windows software  - Print server console accessible via serial port, TELNET or NetWare, NetWare PCONSOLE, PRINTDE, NWADMIN  - Simple Network Management Protocol (SNMP) MIB I & II, IP or IPX Other Features  - IP address configuration via serial port, arp, rarp, DHCP, BOOTP, XAdmin utility, HP JetAdmin, NetWare and DEC MOP  - Automate detection of NetWare frame type can be forced  - On-line HELP  - Sophisticated diagnostics, incl. protocol tracing & crash dump  - Test page and factory reset switch

10BaseT / 100BaseTX Connector: RJ-45 on the interface (100Base TX & 10BaseT) Cabling: CAT5 (Cabling not included) Incl. SATO WPCPlus Web-Based Server SATO's new WPCPlus provides unparalleled control over your barcode printing application from virtually anywhere. Features:  - Printer Setting Control  - Real-Time Printer Status  - Easy Access via Internet

802.11b Wireless Variable Data Rates: 11, 5.5, 2, and 1MBps Frequency Band: 2.4GHz ISM Band Wired Equivalent Privacy: 128-bit, 64-bit (compatible with 40-bit), none Sensitivity Type: AWGN, 8E-2 PER Sensitivity Rates:  - 91dBm at 1Mbps, -88dBm at 2 Mbps  - 87dBm at 5.5Mbps, -84dBm at 11Mbps Range: 100m Indoor, 300m Outdoor

External Print Server

100baseTX/10baseT print server w/ 1 parallel & 1 serial port & TCP/IP, IPX/SPX, NetBEUI, NetBIOS IP, DLC/LLC, Direct Mode IP/IPX. Physical: 2.5" (6.4cm) x 1" (2.5cm) x 4.4" (11.2cm) Electrical: Input Power: 1A@5VDC/ External Power Supply: 115VAC (U.S.) I/O Compatibility: IEEE1284 bi-directional Centronics-parallel (36-pin Centronics 1284B female connector) RS232 serial port (RJ45 connector) with program selectable baud rates to 57.6k bps

Twinax/Coax

For all SATO printers that support plug-in interfaces Converter: EBCDIC to ASCII data stream translations Connector: Supplied with Twinax and Coax connector Twinax Printer Emulations: IBM 5225, 5256, 4214, 3812/5219 Coax Printer Emulations: IBM 3287, 3262 Multiple Host Attachments: IBM Twinaxial (S/3x & AS400) / Coaxial (3174 & 3274 Controllers)

Call 513-984-2101 or 800-446-1991 for the RACO Discount Price!

SATO Barcode Printers and Accessories takes you back to the last directory.

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.